1. Settings
There are three settings on this package:
1.1. Language
When you click on a cabinet, the attributes will be in the language of your choice: English or French.
If you wish to change this option:
- Go the User Created Standards list
- Click on the UCS called SER1-2.0 Serrure
- In the public variables, select the Language you wish
1.2. Material schedule
In the Pull material schedule, put the corresponding materials to the parts as above. You have two different model of 3 points lock, make your choice.
Once it's done, right-click on each part to change the material in multiple schedules.
1.3. Model Modification
If the model of the cylinder lock is not exactly as your, you can modify the operation on the model !
- On the Material Catalog
- Double click on the 3 Point Lock Material
- Go into the model
- Make the changes you want on the operations
2. Using the attributes
- Select a cabinet in any ortho view
- By clicking on a door or a drawer, the attribute L1-Lock will appear
- Choose between the simple lock or the 3 point lock
L1 - Attribute to activate the lock or the 3 point lock
L2 - For changing the reference of the lock on the door
L3 - Select if you want the lock vertical position to refer to the ground or to the door center
L4 - Distance between the lock and the door center
L5 - Distance between the lock and the ground
L6 - Horizontal adjustment for the lock, automatically the lock edge will be at the door edge
L7 / L8 - Top and bottom adjustment for the 3 point lock
2.2. Drawer Attributes
On the drawer you can call a VCS lock
L1 - Attribute to activate the VCS lock on the drawer
L2 - Change the position of the lock on the door
L6 - Horizontal adjustment setting
L7 - Vertical adjustment setting
3. Manual Mode
You have the posibility to add the 3 point lock manually by adding a new part:
- New part
- Select part group Pull
- Choose the part Z-Serrure 3 Pts / 3Pt Lock
- Allow UCS modification
- press next and set the orientation you want
- Finish
Now you just have to set the position and the dimension of the 3Pt lock helped with the two attributes L-Cylinder position & L-Dimension